一、产品种类/Product category

铸铁除渣剂、铸钢除渣剂、球铁除渣剂。

Cast iron slag remover, cast steel slag remover, ductile iron slag remove

二、产品用途/Product use

主要用于铸铁、球墨铸铁和用于普通铸铁。

Mainly used for cast iron, Ductile Iron and ordinary cast iron.

三、产品功能及特点/ Functions and features of the products

1、加入量少、聚渣能力强、易于结壳，去除；

Small amount of addition, strong slag-gathering ability, easy to Shell, remove;

2、渣为脆性，不粘包；提高炉衬寿命；

The slag is brittle and non-stick, and the lining life is increased

3、比重轻，膨胀系数大，覆盖宝温性好，处理金属液时温度下降小，并且具有一定的脱氧效果；

Low specific gravity, large expansion coefficient, good covering temperature, low temperature drop in metal liquid treatment, and has a certain deoxidation effect;

4、有效覆盖金属液表面，减少熔炼时合金元素氧化；

Effectively covering the surface of liquid metal to reduce the oxidation of alloy elements during melting;

5、不改变金属成分，不污染金属液；

Does not change the metal composition, does not pollute the metal liquid;

6、使用时无烟无尘，保持清洁的车间生产环境。

When in use, it is smoke-free and dust-free to maintain a clean workshop production environment.

四、使用说明/Instructions

1、电炉熔炼时，当金属液化清后，在金属液表面撒上少量除渣剂初步去渣，然后撒上一层覆盖在金属表面，起保温和聚渣作用，出炉前扒渣。

When the metal is melted in electric furnace, a small amount of slag remover is sprinkled on the surface of the liquid metal to remove the slag, and then a layer is spread on the surface of the metal to keep the heat and gather the slag.

2、在浇包内铁水表面少量覆盖即可浇注。

The hot metal surface in the ladle can be covered by a small amount.

3、总加入量约为金属液总量的0.1-0.2%，避免像使用稻草灰那样，大量撒布。

the total amount of metal liquid added about 0.1-0.2% of the total, to avoid the use of Straw ash, as a large number of spreading.

4、本产品适应温度为1320℃-1450℃

The temperature of this product is 1320 °c-1450 °C、

五、理化指标/Physical and chemical index
  

产品名称 Product Name

规格型号 Specification type

粒度 Granularity

化学成分/Chemical    composition%

物理性能/physical property

Si

AL

Fe

Ti

Ca

Mg

K

Na

烧碱

容量Kgnf

导热系数

含水量

适用 范围

除渣剂

HS-CSR4

30-50目

72.1/8

13.2/5

0.96

0.02

1.12

2.64

2.31

2.4/2

4.1/4

0.06

＜1

冶炼集渣